Bore Boss®
$9.99
WORLD’S EASIEST BORE CLEANER
The single piece Dual Action Cable with integrated phosphor bronze brush and braided mop wraps around the unique Flex-Case Handle to keep the system stowed and organized. To use, simply flip, feed, clip and pull. Throw it in your pack, or put it in your pocket. It’s the next best thing to a self-cleaning gun.
The first ever self-storing, easy-feeding, clean-pulling, field-ready, hassle-free, pure-genius bore cleaner. The era of using dirty ropes to clean your bores has come to an end. We simplified, enhanced, encased and cleaned up the whole process to bring you a highly evolved product that outsmarts the status quo.
- Additional information
Additional information
- HANDLE DOUBLES AS CLEAN STORAGE FOR CLEANING CABLE
- DURABLE POLYCARBONATE HANDLE IS SURROUNDED BY A FLEXIBLE OVERMOLDING
- PHOSPHOR BRONZE BRUSH
- 8-1/2″ LONG BRAIDED MOP FOR HANDGUNS AND RIFLES, 10″BRAIDED MOP FOR SHOTGUNS
- CABLE CONNECTOR – CONNECTS THE CABLE TO THE HANDLE QUICKLY AND EASILY
- 12″ LONG CABLE FOR HANDGUNS,
32″ LONG CABLE FOR RIFLES AND SHOTGUNS
20″ LONG CABLE FOR CARBINE
REAV-Bore Boss_17cal-Rifle_Sheet
REAV-Bore Boss_22cal-Rifle_Sheet
REAV-Bore Boss_223cal-556mm-Rifle_Sheet
REAV-Bore Boss_243-260cal-65mm-Rifle_Sheet
REAV-Bore Boss_270-280cal-7mm-Rifle_Sheet
REAV-Bore Boss_30-308cal-762mm-Rifle_Sheet
REAV-Bore Boss_357-38cal-9mm-Handgun_Sheet
REAV-Bore Boss_9MMCarbine_Sheet
REAV-Bore Boss_40-41cal-Handgun_Sheet
- When would I use the Bore Boss?
The Bore Boss is designed and intended for a quick clean/run-through after shooting to minimize and remove carbon fouling that has not yet baked-on within the bore. This will help minimize the amount of baked-on carbon that will need to be removed when a deep bore cleaning is executed.
- How do I know which Bore Boss to use with my firearm?
Each Bore Boss is sized to fit specific calibers. Certain calibers are available in different lengths as well (handgun / carbine / rifle). Make sure to cross reference your caliber and barrel length when selecting the appropriate Bore Boss. Please note that some Bore Boss sizes are compatible with multiple calibers (for example .357 / .38 / 9mm). This is possible because the size of the Bore Boss is based on the inner diameter of a barrel, and not the cartridge size or style.
- Can I use the .223/5.56 Bore Boss for my .22 Rifle?
Many .22 rifles will NOT work with the .223/5.56 Bore Boss. The .223/5.56 Bore Boss bore brush will not always make the sharp turn through small ejection ports and into the bore. However, the .22 Bore Boss is designed with a shortened bore brush located inside the mop. This allows the brush to make the sharp turn into the bore.
- Will the handgun Bore Bosses (.357/.38/9mm, .40/.41, and .44/.45) work on my rifles/shotguns?
Our handgun Bore Bosses have cables that are 12” long and it will not be long enough to work with a rifle or shotgun.
- Should I use a solvent on the braided mop?
The Bore Boss does not have any cleaning chemicals pre-applied to the braided mop. It is up to the preference of the user if they want to use the Bore Boss dry or add solvent themselves. If using a solvent, we recommend using a mild cleaning oil while cleaning your bore. Aggressive solvents can damage the Bore Boss.
- How do you clean the braided mop on the Bore Boss?
If you are using a mild cleaning oil with the Bore Boss, try to dry the braided mop with a shop towel or paper towel after use. After the braided mop has collected a fair amount of fouling from the bore (this usually takes many cleaning sessions and does not need to be done often), we recommend cleaning the braided mop with a mild soap and water solution and allowing it to air dry thoroughly before storing the braided mop back in the handle.