BORE-MAX™ SPEED JAG™ & PATCHES
FASTER RESULTS. LESS EFFORT.
Unlike traditional jags, tips and square patches, Speed Patches are optimally fitted for maximum bore contact and no-bunch scrubbing when center-spiked over the Speed Jag. This means a cleaner bore with less pass-throughs. Less effort and faster results.
WARNING! Speed Jag & Speed Jag Patches are precisely sized for ideal fitment. Only use Speed Jag Patches with Speed Jags and only use Speed Jags with Speed Jag Patches. Failure to do so can result in a seized jag within the bore.
- Additional information
UP TO 4X MORE PATCH CONTACT = MORE SURFACE CLEANED
Bore-Max Speed Jag and Patches are components of the Bore-Max Speed Clean System for faster and easier bore cleaning. Within the bore, carbon and copper fouling build-up in layers over time and cumulatively have a significant impact on a firearm’s performance if left unchecked. The carbon build-up essentially insulates the copper fouling from the outside in. Carbon layers need to be removed mechanically with a bore brush in order to fully expose the copper layers beneath. Alternately, copper must be chemically dissolved in order to remove it from the bore, as a brush is ineffective at breaking loose these heat-melded deposits. Sized to account precisely for both the jag diameter and patch thickness, this Speed Jag and Patch combo provides the optimal compression to thoroughly and consistently reach into the lands and grooves. Tight enough to provide superior compression within the bore while still remaining relatively easy to push through. The Speed Jag and Patch system gets more patch material in the bore, eliminates bunching and maximizes the effectiveness of each pass-through. Speed Patches are a synthetic material that that has shown to have superior absorbency over cotton. This material is better at absorbing fouling and spent solvent in the bore and is more effective at picking up and trapping crud.
.22 / .223 CAL / 5.56MM, .243 CAL / 6MM, .260 CAL / 6.5MM, .270 CAL, .284 CAL / 7MM, .30 CAL / 7.62MM, .22 CAL, .380 CAL / 9MM, .40 CAL, .45 CAL
- SPIKED TIP
- BORE-FIT™ PRECISION
- 2X TO 4X MORE BORE CONTACT (PISTOL vs. RIFLE)
- NICKEL PLATED – IMPERVIOUS TO SOLVENTS
- 8/32” THREADS
- IDEAL PATCH THICKNESS & MATERIAL ENSURES BORE-FIT PRECISION
- SUPER ABSORBENT POWER SCRUBBING QUILTED FIBERS
- INCREASED SURFACE CONTACT WITHOUT BUNCHING