Check your email for 10% off your next order!

Gun Tool Pro® (Temporarily out of stock)

$34.99
  • Navigate to video

Gun Tool Pro® (Temporarily out of stock)

$34.99

A toolkit that fits in your hand.

Made for rifles and shotguns, Gun Tool Pro’s rock-solid frame features 30 hard-working tools. Two-inch long bits fit into the magnetic 1/4” driver and 1/4” wrench for extra torque. It features two files, a locking claw-point knife and a removable magnetic storage container for holding small screws and pins. It also features a universal choke wrench and tap hammer, all in a sleek design. Gun Tool Pro sets the standard for compact gun tools.

Product overview

  • Removable magnetic storage compartment
  • Choke wrench fits 6 gauges .410 to 10
  • Two metal files
  • 14 firearm-specific Torx®, Allen®, Phillips® and flat drivers/bits
  • 1/4” bit driver
  • Lanyard loop
  • 2.5” claw-point knife blade
  • 1/4” bit wrench for extra torque
  • Tap hammer
  • Scope turret tool
  • Pin punch
  • Details

    Two bit drivers and double-sided bits

    Two bit drivers located at the front and on the side of the frame handle your precision adjustments and high torque jobs, respectively. Eight square-cut, hollow ground bits ride right onboard in a spring-loaded hatch.

    • T15 Torx®
    • T20 Torx®
    • T10 Torx®
    • 3/32" Flat
    • 3/16" Flat
    • #2 Phillips®
    Gun Tool Pro (Temporarily out of stock) - Two bit drivers and double-sided bits

    Allen® drivers on extended shafts offer reach

    Allen wrenches on 2.5" steel shafts allow you to reach deep into recesses to make precision adjustments on firearms, optics, and accessories.

    Gun Tool Pro (Temporarily out of stock) - Allen® drivers on extended shafts offer reach

    All tools to disassemble, adjust, maintain

    Onboard and at the ready are a tap hammer for stubborn pins, fine and ultra fine metal files for deburring and polishing, a universal choke wrench for all gauges 12 - .410, and a special scope turret tool.

    Gun Tool Pro (Temporarily out of stock) - All tools to disassemble, adjust, maintain

    Surgically sharp claw point blade

    The claw-point pattern blade on a liner lock is 2.5 inches in length and scalpel sharp to handle all of your everyday cutting operations.

    Gun Tool Pro (Temporarily out of stock) - Surgically sharp claw point blade

Two bit drivers and double-sided bits

Two bit drivers located at the front and on the side of the frame handle your precision adjustments and high torque jobs, respectively. Eight square-cut, hollow ground bits ride right onboard in a spring-loaded hatch.

  • T15 Torx®
  • T20 Torx®
  • T10 Torx®
  • 3/32" Flat
  • 3/16" Flat
  • #2 Phillips®
Gun Tool Pro (Temporarily out of stock) - Two bit drivers and double-sided bits

Allen® drivers on extended shafts offer reach

Allen wrenches on 2.5" steel shafts allow you to reach deep into recesses to make precision adjustments on firearms, optics, and accessories.

Gun Tool Pro (Temporarily out of stock) - Allen® drivers on extended shafts offer reach

All tools to disassemble, adjust, maintain

Onboard and at the ready are a tap hammer for stubborn pins, fine and ultra fine metal files for deburring and polishing, a universal choke wrench for all gauges 12 - .410, and a special scope turret tool.

Gun Tool Pro (Temporarily out of stock) - All tools to disassemble, adjust, maintain

Surgically sharp claw point blade

The claw-point pattern blade on a liner lock is 2.5 inches in length and scalpel sharp to handle all of your everyday cutting operations.

Gun Tool Pro (Temporarily out of stock) - Surgically sharp claw point blade