Check your email for 10% off your next order!

The Gun Tool™

$24.99
  • Navigate to video

The Gun Tool™

$24.99

18-in-1 shooter’s multi-tool.

We set out to make a gun-specific multi-tool and ended up creating an entire category. This gun tool was designed for those “Oh, crap” moments – when problems strike and they need to be fixed fast. The Gun Tool can change choke tubes, mount and adjust scopes, tighten screws and break down actions. No matter where a problem with a gun happens – in the field, at the range or workbench – count on The Gun Tool to fix it.

Product overview

  • Stainless steel frame with non-slip grip side plates
  • Pin punch
  • Choke tube wrench fits .410–10 ga.
  • Scope windage/elevation adjuster
  • 3 Torx® wrenches: T20, T15, T10
  • 2 Allen® wrenches:3⁄32” & 5⁄32”
  • Magnetic 3/16” hex driver
  • 1.5” 420 stainless steel claw-point knife
  • Storage bay holds 4 hex bits: P2, P1, 1⁄8” & 3⁄16” at driver

"If you carry only one tool the next time you take your rifle or shotgun afield, this may be the one."

American Hunter, April 2012

  • Details

    Bit driver up front for precision adjustments

    A magnetic bit driver is situated at the front of the tool to give you a firm grip and the precision to make detailed adjustments even on sights and optics.

    The Gun Tool - Bit driver up front for precision adjustments

    Four square-cut, hollow ground bits onboard

    Four square-cut, hollow ground bits ride in a spring-loaded hatch at the ready for whatever you encounter.

    • 3/32" Flat
    • 3/16" Flat
    • #2 Phillips®
    The Gun Tool - Four square-cut, hollow ground bits onboard

    Allen® and Torx® drivers offer reach

    Allen and Torx wrenches on 1.5" steel shafts allow you to reach into recesses to make precision adjustments on firearms, optics, and accessories.

    • T15 Torx®
    • 5/32" Allen®
    • T20 Torx®
    • T10 Torx®
    The Gun Tool - Allen® and Torx® drivers offer reach

    Disassemble, adjust, maintain your guns and optics

    Onboard and at the ready is a pin punch, a universal choke wrench for all gauges 12 - .410, and a special scope turret tool.

    The Gun Tool - Disassemble, adjust, maintain your guns and optics

Bit driver up front for precision adjustments

A magnetic bit driver is situated at the front of the tool to give you a firm grip and the precision to make detailed adjustments even on sights and optics.

The Gun Tool - Bit driver up front for precision adjustments

Four square-cut, hollow ground bits onboard

Four square-cut, hollow ground bits ride in a spring-loaded hatch at the ready for whatever you encounter.

  • 3/32" Flat
  • 3/16" Flat
  • #2 Phillips®
The Gun Tool - Four square-cut, hollow ground bits onboard

Allen® and Torx® drivers offer reach

Allen and Torx wrenches on 1.5" steel shafts allow you to reach into recesses to make precision adjustments on firearms, optics, and accessories.

  • T15 Torx®
  • 5/32" Allen®
  • T20 Torx®
  • T10 Torx®
The Gun Tool - Allen® and Torx® drivers offer reach

Disassemble, adjust, maintain your guns and optics

Onboard and at the ready is a pin punch, a universal choke wrench for all gauges 12 - .410, and a special scope turret tool.

The Gun Tool - Disassemble, adjust, maintain your guns and optics